[China Building Materials Network] In the product exhibition hall of Nanping Sanjin Electronics Co., Ltd., the dazzling array of LED lamps is very eye-catching. The general manager of the company, Ning Lihua, took us to the adjacent workshop of Nanping Huasheng Auto Parts Co., Ltd. The machine tools of the workshop were all LED lights. This workshop has 100 LED machine lights, but it only consumes more than 700 kWh. If it is an ordinary machine tool, 100 ç› 60 watt bulbs need more than 7000 degrees of electricity. This exchange saved 90% of energy consumption, and the workshop saved more than 30,000 yuan in electricity costs in half a year. Ye Guohua, an engineer at Huasheng Auto Parts Co., Ltd., said.
Huaying Company spent more than 1 million yuan on electricity production per year. In order to reduce the cost of electricity for production, in March of this year, the company cooperated with Sanjin Company to replace LED lighting equipment for some lighting equipment in the plant. After half a year, the sharply reduced electricity bills set up a very convincing billboard for Sanjin.
In recent years, with the popularity of energy-saving and environmentally-friendly products, LEDs are considered to be the new generation of green lighting sources in the 21st century due to their high efficiency, energy saving, environmental protection, safety and long life. The market demand is increasing. Sanjin Electronics relies on independent innovation to develop LEDs. In March 2008, LED projects began to be officially put into production, mainly producing more than 10 kinds of LED lighting lamps such as ceiling lamps and bulbs. The products are favored by domestic and foreign markets, except for application in Weibei. In addition to industrial and mining enterprises and commercial lighting, it is also sold to Yiwu, Qinhuangdao, Anhui and other places, and some products are also exported to the Netherlands, Germany and other countries. From January to September this year, the company's LED project output alone reached 3.257 million yuan.
Since the beginning of this year, the company has increased its product research and development efforts. It has also introduced LED light source integrated packaging production technology from Japan. The LED lighting fixtures are assembled by manual assembly and assembly into a set of integrated equipment for reliable production. The sex has been greatly improved, laying a solid foundation for expanding production. Ning Lihua said that in addition to industrial and commercial applications, general home decoration has begun to use LED lighting, and our company is ready to invest 30 million yuan to purchase more advanced equipment, reduce costs, improve product stability, and expand Production, so that products into thousands of households.
Calstar® Solvent Recovery Machine Recyclable: washing solvent, acetic acid esters, halogenated hydrocarbons, three ethyl chloride, trichloroethylene, solvent oil, isopropyl alcohol, acetone, butanone and cyclohexanone, days that water, wash water gun, banana water, plate washer water, wash water network, wash water, white oil, hand washing water, diluent, washing water, ink cleaning agent, ethyl acetate, toluene, xylene, toluene three, four toluene, banana water, alcohol, ethanol, butanol, two glycol solvent waste and dirty etc..
Calstar® solvent Recovery Machine using the distillation principle: by heating the evaporation of solvent into a gaseous state, the steam into the cooling system to flow out, so that the recovery of organic solvents. So as to make the waste, dirty, old organic solvent recycling, recycling and reuse. Both can save a lot of procurement costs, but also to reduce the pollution of the environment.
Cleaning Agent Recovery Machine,Recyclable solvent,Recoverable solvent species
Ether Recycling Machine,Ether Solvent Recovery,Ether Solvent Recycler,Ether Solvent Distillation,Solvent Recycler
SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , http://www.calstarkb.com