How to install S&A chiller CW-5200 on 130W laser cutter

Firstly, be ready for 2pc of water pipes and power line

Open the water injection cap of water chiller

Fill into pure water

Then tighten the cap

Connect the water pipes

Please connect one end to the outlet of water chiller

And connect the other end to the inlet of machine

One end to the inlet of water chiller

Find the water protection line

And put the right end to the connector of water chiller

Plug in supply power

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:

Website: http://

Oil pumps are forced feed to oil to each friction surface under raising oil pressure and ensuring engine oil capacity.

Oil pumps are divided into Rotor Oil pumps and Gear Oil pumps. Most of automotive oil pumps are gear pumps. When the car`s engine begins to work, the engine shaft drives the Oil Pump gear. In high speed operation, it forms a strong positive and negative pressure around the internal and external of oil pump, and the oil is sucked by oil pump, pressuring to the engine parts, so as to realize a kind of compulsory lubrication. And oil pump, here, increase the internal and external pressure difference. The faster the speed, the greater the pressure, and the lube oil floe is faster, more comfortable car run up.

Oil Pump

Oil Pump,Engine Oil Pump,Gear Oil Pump,Hydraulic Oil Pump,Rotor Oil Pump

NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com