Soil hardness tester for determining soil hardness

Soil hardness tester is an instrument for measuring soil hardness as its name implies. In agricultural production, soil is the most basic requirement. Therefore, as the degree of refinement of agriculture continues to increase, we need to use different instruments to detect various soil traits, such as the use of A soil moisture meter measures the moisture content of the soil, a soil nutrient meter measures the nutrient content of the soil, and a soil hardness meter measures the hardness of the soil. Only the soil's various parameters are up to standard. Based on this, sowing production is possible to obtain high-yield and high-quality grain.

Soil hardness testers are often used to investigate and study soil permeability, aeration, and soil properties of large-scale machine operations. The use of a soil hardness tester to determine soil hardness is very simple and basically requires only three steps to be measured. Data, here's a simple introduction to the soil hardness tester to determine soil hardness methods and steps:
In the first step, for the plot to be measured, the surface of the soil is first leveled, and then the tip of the soil durometer is slowly and uniformly inserted into the soil until the (mouth) portion. The second step is to pull out the soil hardness tester in a straight forward manner. At this time, the hardness indicator on the meter is the measured soil hardness value. Read the data according to the correct method and record it. The third step, as long as this step is to finish the measurement after the completion of the measurement, after reading the measurement data is completed, this time the indicator table needs to be zeroed, the way to return to zero is to press the front side by pressing o.
The above is the method of measuring soil hardness by a soil hardness tester. A simple three-step process can be used to complete the measurement. Therefore, the soil hardness tester is a very convenient and accurate measuring instrument for agricultural soil measurements, but it also appears during the determination process. Lateral head acetylene step 磐寥Jia虏饬 虏饬 挡 徽 徽 返 返 返 窒螅飧鍪 窒螅飧鍪 窒螅飧鍪 窒螅飧鍪 窒螅飧鍪 窒螅飧鍪 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐 蛐枰颐, By measuring again to obtain the correct soil hardness measurement.

   Heavy oil burners are specially designed for waste tyre pyrolysis machines, 

which burns with the oil generated from system itself.

  It is not only easy to operate but also quite cheap.

  the final products will be 40%-45%tyre oil(fuel oil), carbon blacks and  35% carbon blacks, and 10% steels  and another 5-10% recycling gas(CH4-C4H10).

the main process is that by heating the reactor directly, tyres will be pyrolysised into oil gas;

condensers or cooling pipes will cool the gas down into liquid oil with the help of recycling water;

then the rest gas which could not be cooled down into liquid oil will be recycled into reactor heating system; after oil gas coming out completely, stop heating the reactor, and cool down reactor below 70 degrees; then can open the door and discharge carbon black automatically...

there are models with capacities from 5tons to 20tons per batch

LN-2200-6000 capacity of 5-6ton 

LN-2200-6600 capacity of 7-8ton 

LN-2200-8000 capacity of 9-10ton 

LN-2600-6600 capacity of 10-12ton 

LN-2600-8000 capacity of 12-14ton 

LN-2800-6000 capacity of 10-12ton 

LN-2800-6600 capacity of 12-14ton 

LN-2800-8000 capacity of 15-20ton 

if cut into smaller pieces, it could process more.

Heavy Oil Burners For Waste Pyrolysis Machines

Boiler Equipment Heavy Oil Burner,Heavy Fuel Oil Burner,Fuel Oil Domestic Burners,Fragrance Oil Burners

Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com