Asphalt transporter is a special vehicle used for transporting liquid asphalt. Even if it is a special vehicle, it must comply with the traffic regulations. The driving specification is a kind of restraint for the driver and the traveling vehicle. The purpose is to protect the safety of the driver and the vehicle. Let's take a look at the specifications that need to be observed and adhered to when transporting asphalt carriers.
Asphalt transport vehicle specification
1, abide by the rules. Asphalt transport vehicle drivers must abide by the "Regulations of the People's Republic of China on Road Traffic Management" and the relevant traffic safety management rules and regulations and drive safely. Do "Three Don'ts", that is, not drink driving, fatigue driving, speeding.
2. You must not leave without permission. The evacuation of asphalt transport vehicles must be approved by the management personnel before they can withdraw. Otherwise, they must bear related responsibilities.
3, special circumstances and timely reporting. In the event of a breakdown or violation of a vehicle, it is necessary to notify the fleet management personnel immediately, and report the maintenance or illegal situation and the time required for handling. At the same time, timely processing shall be carried out in order to transport the asphalt material to the construction site in a short time, so as to ensure the temperature of the asphalt mixture to the field.
4, should work at low speed. Vehicles should keep running at a low speed (5KM/hour) at the factory site and paving site, and pay attention to avoiding other workers in the site to avoid safety accidents.
Asphalt transporter operating specifications
1, all listen to the command. Before loading the asphalt trucks, listen to the instructions of the personnel of the mixing tower, and timely handle the debris and spraying of oil in the compartments as required; pave the construction site to follow the instructions of the on-site construction personnel and the team leader, and stop the vehicles in sequence and discharge them in order. .
2, can not be exposed too soon. After the driver of the asphalt transport vehicle enters the construction site, he must not uncover the covered canvas or cover to prevent the temperature of the asphalt mixture from being too low and affect the paving quality.
3, pay attention to distance when discharging. When reversing the loading and unloading, follow the instructions and pay attention to the distance between the bucket and the hopper loading hopper and prevent the bucket from hitting the paver.
4, pay attention to unloading when discharging. Lightly unload and lightly down, pay attention to the discharge conditions, prevent the over-unloading to pour the asphalt material out of the pavers and affect the paving quality and speed.
5, tail handling. The “tail material†of the asphalt transport vehicle compartment shall be under the command of the on-site construction worker, and shall not fall on the track area of ​​the paving locomotive and the remote area of ​​the paving machine, causing the paving machine to stop.
The driving rules for asphalt transport vehicles are not intended to be binding but only for safety. For people's safety, but also for the safety of the car. These norms are not bad, not complicated, just pay more attention to one point, you can get away from the danger of one point!
LINA Double Dust Proof Dispersion Kneader
In order to meet the world`s growing pursuit of environmental protection, LINA invented China`s first environmentally friendly dispersion kneader which is specifically for the kneading of high filling rubber materials, such as carbon black powder, white carbon black powder, ceramic powder, mental powder and so on. This new designed Internal Mixer can not only mix powder materials efficiently, but also can prevent dust flying and pollution in the workshop.
The dust-proof level of this type of Dispersion Mixer has reached the highest level in domestic. The mode of rubber mixing machine eases or even eliminates the harm caused by the mixing dust and odor of conventional internal mixer. More importantly, LINA double dust proof dispersion kneader significantly reduces the pollution in workshop or laboratory.
M-W pressurization is also applied to ensure even mixture of materials and optimizes nature variation and achieve X curvilinear motion of the ingredient materials, providing excellent abrasion resistance and service life is 1-2 times longer than traditional rubber & plastic mixing machines.
Specifications of LINA Double Dust Proof Dispersion Kneader
|
LN Dispersion Kneader |
Type |
Size |
Dimension (mm) |
Weight (kg) |
|
LN-LAB TEST (LT) kneader |
0.5 |
1600*900*1900 |
800 |
|
|
1 |
1600*900*1900 |
800 |
||
|
2 |
1600*900*2000 |
900 |
||
|
3 |
1600*900*2100 |
900 |
||
|
5 |
1900*1000*2100 |
1200 |
||
|
10 |
2200*1350*2150 |
2500 |
||
|
LN-Mass Production |
15 |
2200*1350*2150 |
4000 |
|
|
20 |
2500*1450*2450 |
3800 |
||
|
25 |
2500*1500*2500 |
4500 |
||
|
35 |
3200*1900*3000 |
6500 |
||
|
55 |
3300*2000*3100 |
7800 |
||
|
75 |
3800*2300*3200 |
10800 |
||
|
110 |
4100*2300*3400 |
16500 |
Main Features
1. Precise data recording & analyzing system.
2. Excellent dispersion effect.
3. User-friendly control system.
4. Fit for a various of materials.
5. Easy cleaning for different materials.
6. Better performance dust seal for preventing material leakage.
Dust Proof Rubber Mixers,Dust Proof Plastic Mixers,Dust Collection Dispersion Kneader,Internal Mixer
LINA Machinery Industrial Co.,Ltd , http://www.linakneader.com