Turn waste into treasure--discard waste into resources

Sawdust drying equipment outlines the development of science and technology and resource constraints, wood (sawdust), and a variety of straws, converted from discarded waste into resources that can be used for the production of wood products and higher production of biofuels for the combustion value Edible fungus residues require wood chips and broken slag after the drying process.

Although many drying equipments are not applicable in the market, a large number of biomass pellet fuel manufacturers can only maintain production because of low efficiency of drying equipment, equipment operation is not smooth, and product quality problems, and profits are low with biomass fuels, charcoal production. The company was forced to seek for advanced production equipment and professional equipment manufacturing advanced technology companies. The optimized design of drying equipment can produce quality competitive products, followed by investment, stable operation of machinery and equipment, low maintenance cost, high production efficiency, taking into account working conditions and environmental protection requirements.

The organic matter of wood (sawdust) is about 40-50% in general, and the dry moisture content is about 12%. The required water content, the main water source of water is free water and domestic water, and free water is easier to remove. Although water is difficult to remove. The wood (chip) drying process is mainly based on the material properties of the finished product, easy or not, one-time investment and operating costs. At present, wood drying equipment is most commonly used in air dryers and fluidized bed dryers, rotary drum dryers, air dryers and sawdust roller dryers. Air dryers have the lowest investment, especially at production time, but Due to the short drying time of the air dryer and the inability to classify the body weight, it is prone to dry and unstable jamming, and the operation is unreliable, resulting in the incompatibility of the Houbu equipment and wasted investment and energy.

There are also many drums and air drying chips. However, most single drums occupy a large area, have poor insulation, and uneven distribution of wood chips in single drums, and there is no weight classification unit, often unstable phenomenon. The most common is that the water is not correct and the control is too dry or too wet. After all, the program cannot work, both good and bad. In addition, wood contains a small amount of impurities such as stones and nails. If there is no treatment equipment, the equipment is often damaged, resulting in fire, explosion, and so on.