Preparations to be carried out before the gold deposit

Sand gold ore crushing grinding usually not required, compared with the gold veins, can save a lot of investment in equipment and operating costs. The ore preparation work before the gold selection is mainly screening, grading and washing. In order to separate the rock into monomer particles and completely separate the valuable mineral particles, the gold ore mine also needs to be disintegrated, but generally no separate process is required. If the gold deposit is mined by hydraulic mining, the disintegration of the rock is basically completed during the mining process. When other mining methods are used, rock decomposition and grading, washing operations are often carried out in the same equipment (for example, flat screens or drums).
      The ratio of the maximum particle size of the gangue to the minimum grain size of the gold in the gold deposit can be several thousand times, and the large gravel usually does not contain gold. Through the grading operation, the metal-free boulders and gravel can be separated, thereby greatly reducing the volume of the candidate material.
      The disintegration operation requires a certain amount of power. The power consumption per unit weight of material is the standard for the strength of equipment disintegration. The more sticky the material being processed, the more power I need. According to the difficulty of material disintegration and washing, sand gold ore can be divided into easily washable (gravel-pebbled) ore, medium washable (with a small amount of clay ) ore and hard-washed mud (including a large amount of clay) ore.
      Production practice shows that in the gold ore dressing process, washing and grading is a key link. The washing is not clean, the metal loss is serious, and the mud group destroys the sorting operation, resulting in a decrease in recovery rate and gold production. The classification is not good, the coarse and fine grades are mixed, and the sorting effect is not good. Based on the systematic analysis of the grain size composition of the ore and the distribution rate of gold, a practical washing and grading scheme should be formulated based on the specific conditions of each mine.

Working principle

Vibrating Feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration,the materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, and avoiding the further crushing, so screening purpose can be reached.



Application

GZV series Electromagnetic Tiny Vibrating Feeder is a kind of linear direction feeding equipment. It features smooth vibrating, reliable operation, long service life and being suitable for feeding.


GZV series Electromagnetic Tiny Vibrating Feeders are widely used in mining, building material, food, chemical and other industries in the crushing and screening plants. In the production line, it can deliver materials to crusher evenly and continuously and at the same time, it can also screen materials roughly.


Vibrating feeder can be used in these areas such as metallurgical industry, coal mining industry, mining-selecting, building, chemical and grinding industry, etc.


GZV Electromagnetic Vibrating Feeder

GZV Electromagnetic Vibrating Feeder

Gzv Electromagnetic Vibrating Feeder,Durable Electromagnetic Vibration Feeder,Auto Electromagnetic Vibrating Feeder,Electromagnetic Vibrating Feeder

XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.cwsieve.com