Shaanxi Automobile Delong F3000 front and rear eight diesel tanker transportation medium: diesel / crude oil / kerosene / gasoline, category number: 3, density 830/830/830/700 kg / cubic meter. Effective volume of the tank: 20.8 cubic meters, the outer dimensions of the tank (length × long axis × short axis) (mm): 9000 × 2340 × 1460. The actual volume of the tank is 25.5 square meters; the chassis is equipped with Delong F3000 extended high-top cab, Weichai 300 Dr. common rail engine, Shaanxi gear nine gear 119 gearbox, 7.5 tons MAN+ disc brake, 13 tons MAN double bridge, 12.00 Steel tire. With air conditioning, electric glass, desert air filter, 300L aluminum alloy fuel tank, Tianxing Jianzhiya version terminal, ECU speed limit, disc brake, dangerous signage, SCR national four-tail gas aftertreatment device.
Product Name HLQ5312GYYSX4 Oil Tanker
Product No.ZLJAN4WP024
Total mass (Kg) 31000
Tank volume (m3) 20.8
Rated load mass (Kg) 16500,16565
Dimensions (mm) 11880×2500×3350, 3720
Curing quality (Kg) 14305
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3,2
Load mass utilization factor
Approach angle / departure angle (°) 18/12
Front overhang / rear overhang (mm) 1525/2580
Number of axes 4
Wheelbase (mm) 1800+4575+1400, 1950+4425+1400
Axle load (Kg) 6500/6500/18000 (with two axes)
Maximum speed (Km/h) 78
Other transport media: diesel/crude/kerosene/gasoline, category number: 3, density 830/830/830/700 kg/m3. Effective volume of the tank: 20.8 cubic meters, the outer dimensions of the tank (length × long axis × short axis) (mm): 9000 × 2340 × 1460. The corresponding load mass of the driver's cab is 3,500kg. With the optional chassis cab. The side protection is made of cold-formed steel / Q235B, bolted. The rear protection is made of cold-formed steel/Q235B, welded joint. The rear protection section has a height dimension of 120 mm, a section width dimension of 50 mm, and a lower edge height of 440 mm from the ground. Only the chassis of the radial tire and the front disc brake are used. Front of the exhaust pipe, install a limited speed device. Install a tachograph with satellite positioning. ABS system manufacturer: Guangzhou Kemi Automobile Brake Technology Development Co., Ltd., ABS system model: CM6XL-6S/6K (6S/6M). The engine/fuel consumption values ​​are: WP10.270E40/40.51, WP10.300E40/41, WP10.375E41/46.51, WP10.350E40/46.35, WP10.336E40/45.8. The engine/fuel consumption values ​​are: WP10.270E40/42.23, WP10.350E40/42.31, WP10.375E41/41.56, WP10.300E40/42.30, WP10.336E40/42.87
Chassis configuration and technical parameters
Chassis manufacturer Shaanxi Automobile Group Co., Ltd.
Chassis model SX5316GYYNN466
Engine manufacturer Weichai Power Co., Ltd.
Engine type WP10.300E40
Transmission model 9JS135
Main reducer speed ratio (drive axle speed ratio) 4.42
Tire specifications model 11.00R20 18PR, 12.00R20 16PR
Comprehensive fuel consumption L/100km 31.3
50km/h no-load constant-speed fuel consumption L/100km 23.6
Shaanxi Automobile Delong M front four rear eight diesel tanker, Delong new M3000 cab, Shaanxi gear eight gearbox, 5.5 tons MAN + disc brake, 11.5 tons MAN single-stage rear axle, 4.625/850*270 ( 8+4), 300L aluminum alloy fuel tank, 11.00 steel wire tire, with domestic ABS, air conditioning, electric window regulator, driving recorder, ECU speed limit, front exhaust pipe, dangerous signage, with domestic ABS, 2KG fire extinguisher. Weichai 300 horsepower, transportation medium: diesel / crude oil / kerosene / gasoline, category number: 3, density 830/830/830/700 kg / cubic meter. Effective volume of the tank: 21.08 cubic meters, the outer dimensions of the tank (length × long axis × short axis) (mm): 9000 × 2340 × 1480. The actual volume of the tank is 26.8 square meters.
Total mass (Kg) 31000
Tank volume (m3) 21.08
Rated load mass (Kg) 16670,16735
Dimensions (mm) 11950×2500×3420, 3660
Curing quality (Kg) 14135
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3,2
Load mass utilization factor
Approach angle / departure angle (°) 20/11
Front overhang / rear overhang (mm) 1485/2740, 1485/2690
Number of axes 4
Wheelbase (mm) 1800+4575+1350, 1800+4575+1400
Axle load (Kg) 6500/6500/18000 (with two axes)
Maximum speed (Km/h) 78
Other optional low-top cabs of the same series; optional side window appearance of the same series; transport medium: diesel/crude/kerosene/gasoline, category number: 3, density 830/830/830/700 kg/m3. Effective volume of the tank: 21.08 cubic meters, the outer dimensions of the tank (length × long axis × short axis) (mm): 9000 × 2340 × 1480. When the driver is allowed to ride three people, the corresponding load mass is 16670kg. The side protection is made of cold-formed steel / Q235B, bolted. The rear protection is made of cold-formed steel/Q235B, welded joint. The rear protection section has a height dimension of 120 mm, a section width dimension of 50 mm, and a lower edge height of 480 mm from the ground. The front of the exhaust pipe is installed with a limited speed device. Only the chassis of the radial tire and the front disc brake are used. Install a tachograph with satellite positioning. The manufacturer and model of ABS system are: Guangzhou Kemi Automobile Brake Technology Development Co., Ltd., ABS system model: CM6XL-6S/6K (6S/6M). The engine/fuel consumption value corresponds to: WP10.290E40/42.78, WP7. 270E40/42.74, WP7.300E40/42.8, WP10.336E40/42.87
Chassis configuration and technical parameters
Chassis manufacturer Shaanxi Automobile Group Co., Ltd.
Chassis type SX5316GYYGM456
Engine manufacturer Weichai Power Co., Ltd.
Engine model WP7.300E40
Transmission model 9JS135
Main reducer speed ratio (drive axle speed ratio) 4.42
Tire specifications model 11.00R20 18PR, 12.00R20 16PR
Comprehensive fuel consumption L/100km 31.6
50km/h no-load constant-speed fuel consumption L/100km 24.2 (This article is from Xiagong Chusheng)
Round Downpipe Roll Forming Machine is used for building, it can as rain gutter uses.
This machine includes one set decoiler, guiding equipment, main roll forming machine, PLC control system, hydraulic cutting and receving table.
It has two cutting modes: flying saw cutting and mould cutting.
Specifications:
Raw material
PPGI or GI
Material thickness range
0.2-0.8mm
Rollers
18 rows
Material of forming rollers
45# steel with chromed
Shaft diameter and mateiral
76mm, material is 40Cr
Material of cutting blade
Cr12 mould steel with quenched treatment
Forming speed
12-15m/min(excluding cutting stoping time)
Main motor power
4 KW
Hydraulic station power
3KW
Mode of cutting
Hydraulic cutting or flying saw cutting or mould cutting
Control system
PLC Frequency Control System with touch screen
Working process:
Decoiler - Feeding guide - Main roll forming machine - PLC control system - Hydraulic cutting - Receiving table
Pictures of machine:
Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Round Downpipe Roll Forming Machine
Round Downpipe Roll Forming Machine,Gi Round Downpipe Roll Forming Machine,Gl Round Downpipe Roll Forming Machine,Round Downpipe Roll Cold Forming Machine
YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn