The accident investigation is one of the tasks of the automobile appraisers and often requires preliminary or in-depth appraisal of the accident vehicles. The depth of the appraisal requires the use of special tools and instruments for thorough exploration and accurate analysis, but also to follow professional ethics. After all, some seriously damaged cars will be more complicated to identify, and they can be accurately identified according to the bylaws.
Assessor's Common Tools
Tools for recording information: There are pencils, notebooks, recording equipment or directly recorded on laptops and other devices.
Check the manuals and software for the accessory information: This can be an original accessory manual, a third-party manual, or an evaluation software of a professional software company to check the accessory information and critical vehicle conditions.
Necessary measuring tools: steel tape measure and gauge.
Lifting equipment: Evaluated personnel should be able to operate lifts or jacks on their own to perform correct lifting operations on the vehicle. For more serious collisions, the vehicle should generally be lifted to inspect the underbody.
Commonly used manual tools: Evaluated personnel should be able to use familiar tools such as wrenches, screw drivers, and pliers. When assessing the damage, it is usually necessary to disassemble some of the damaged parts for further inspection, so these tools need to be used frequently.
Assessor identifies vehicle damage steps
To identify a car, in addition to the necessary tools, the assessors should also have a scientific method of damage inspection, which is especially important for cars with serious damage.
The method divides the car into five locations according to the collision damage rule: a zone that is directly affected by a collision, that is, a direct injury site; a second zone, and other body parts that are indirectly damaged; three zones, mechanical parts, including damaged Mechanical parts such as power trains and accessories; four-zone, crew compartment, including damaged interiors, lights, accessories, control devices, and paint finishes in the passenger compartment; five zones, exterior body parts, and trim parts. In the assessment of the accident vehicle, it should be carefully examined one by one from one location to another, and the damage of the vehicle should be recorded in sequence.
Of course, whether you use location inspection or other methods, you should follow the following sequence when you check the accident car:
1. From front to back: Check from the front of the car to the rear, but for back-end collisions, check from back to front.
2, from the outside to the inside: First check the external parts of the damage, such as decorative pieces: Then check the damage of internal structural parts and connectors.
3, from the main to the second: first check the main sub-assembly damage, and then view the damage of small devices and other accessories.
This is the work statute of an automobile appraiser. Although it is not an appraisal division, it can be used for maintenance, district maintenance, or you may not have to worry about being overlooked.
Seed Thresher(seed grader)
This machine used for threshing seeds,shell and screen at the same time.
Through the vibrating screen, the small and big impurities can be removed out . While the light impurities can be collected by the air aspiration system.1. The machine is fully enclosed structure to prevent dust spillover.
2. Spindle with nail structure, nail teeth can be replaced.
3. After threshing, the kernel is separated from the mandrel, and the mandrel is ejected by its own fan.
Seed Thresher
Seed Thresher,Seed Thresher Machine,Grain Seed Thresher,Rape Seed Thresher
Shijiazhuang Goldrain I/E Co.,Ltd. , https://www.goldraingroup.com