Dust monitor configuration and system features

The standard configuration of the dust monitoring instrument is one set of the host computer, including: the control module sensor module power module communication module. Cloud platform management system software 1 set. Mobile client query and SMS alarm 1 set. With LED display module waterproof box 1. Combine 1 meter of 3 meter poles. Include: 3 meters pole, ground cage, lightning rod, bracket and mounting accessories. Optional: optional multiple harmful gas sensor module, meteorological multi-parameter module, high-definition video capture system, solar power supply module, can customize different specifications of LED display .

The dust monitoring instrument can realize the detection of PM2.5, PM10, noise, temperature, humidity, wind direction, wind speed and other parameters in real time, and can be transmitted to the back-end management system in real time, and can be configured to cooperate with dust spraying or blisters equipment when the air suspension reaches a certain level. At the concentration, the device is turned on automatically. Taking into account both energy saving and environmental protection, the management efficiency has been greatly improved and the joint prevention and control of air pollution prevention and control has been truly achieved. The host uses industrial-grade GPRS wireless communication module to ensure real-time transmission of various types of monitoring data. Using the national standard communication protocol (HJ/T212-2005), special communication protocols can be extended to ensure the compatibility and scalability of systems and monitoring instruments. The host has a GPS positioning module that can record the location of the monitoring equipment in detail to facilitate monitoring and management. The online monitoring platform can be logged on through a computer terminal for real-time query of monitoring data. The mobile client can query monitoring data in real time, view information in WeChat push messages, and receive SMS alarms in excess of the standard.

Dust monitor system features, real-time simultaneous measurement of noise and PM2.5, PM10 concentration; at the same time, it can extend meteorological parameters, gas and other parameters. The laser scattering method is used to measure dust particles with fast response and wide measuring range. Pump suction sampling design, uniform intake, stable flow, accurate monitoring. Based on the Monte Carlo method, the data accuracy problem was successfully overcome, and the US control point monitoring data was used. Industrial-grade ARM processors provide stable performance and low power consumption. The optical module is equipped with a sheath gas protection system to prevent surface contamination of the optical device, improving measurement accuracy and operational reliability. With DHS dynamic heating and dehumidification system, it effectively suppresses the influence of temperature and humidity on the measurement results and improves the accuracy of the measurement results.