How to prevent the squeezing of the suction truck at high speed?

When is the car most likely to puncture? Expert analysis concluded that the highest frequency of puncture accidents was caused by the sewage truck driving at high speed. So, how to prevent high-speed puncture?

There are six ways to answer:
First, we must pay attention to the maintenance of tires. Regularly check whether the tire has been injured, scratches, whether due to broken lines caused by the process. Check the chassis to see if there is any damage, if the oil needs to be replaced, if you find a problem, call the customer for after-sales service, or go to the 4S shop for inspection and repair.
Second, pay attention to the tire's life The tire's life is also limited, to a certain mileage depends on the road and wear conditions to determine whether to replace. The sewer trucks that often walk on the mountain roads wear tires relatively quickly and have shorter replacement cycles. The wear of urban roads is reduced, and the replacement cycle is slightly longer.
Third, develop a good habit to check the tire pressure Always check the tire pressure, the interval period is one month, develop the habit of measuring tire pressure every month, at any time to add. In particular, it is necessary to check the tire pressure before high speed and make it within the normal range.

Fourth, high-speed tires to prevent excessive temperature High-speed driving time not too long, it is best to rest for two hours to stop for 10 minutes, in order to facilitate heat cooling, especially in hot summer, but also to increase vigilance.

Fifth, to maintain a good driving habits, control the speed As far as possible to prevent the emergency start, sudden braking and rapid cornering, these actions will increase tire wear and increase the momentary pressure. Do not crush the hard objects on the road and control the speed.

The puncture on the highway is basically affected by tire quality, gas temperature, wear, road conditions and driving operations.