A few days ago, the high performance round block graphite falling film absorber developed by Hebei Chengzhou Tiancheng Graphite Products Co., Ltd. passed the provincial science and technology appraisal. Experts agreed that the equipment has good physical properties and environmental performance. It is another "sharp weapon" in chemical production turning waste into treasure, with obvious technical advantages and promotion prospects.
The product has the characteristics of high compressive strength, good heat transfer effect, strong corrosion resistance, etc. The exhaust gas absorption rate reaches more than 98%, which is 20% higher than other similar equipment. The dual-phase anti-corrosion oriented heat transfer developed by the energy-saving high-efficiency falling film absorption and heat exchange device has a high heat transfer rate, a thermal conductivity of 130 or more, a high temperature of 170°C, and a compressive strength of 0.5 MPa. In addition, through their own research and development of acid, alkali and acid and alkali resistant resins, they solved the old and difficult problems of acid and alkali-resistant, alkali- and acid-proof and acid-resistant, and improved the utilization rate and adaptability of equipment.
The graphite falling film absorber is an important equipment for the recovery and reuse of tail gas in chemical production.
Construction Hoist Steel Structure
Construction Hoist Steel Structure means the construction hoist spare parts like Construction Hoist Mast Section, Passenger Hoist Cage, Construction Hoist Wall Tie and so on.
The length of each mast section is 1508mm, the rack is fixed on the mast by three bolts and it can be exchanged. For the single cage hoist there is only one rack on the mast section, and the mast section can be used for the double cages hoist by increasing one rack. The section of the mast is diverse, select one type section according to different hoist. The mast sections are bolted together with M24 bolts and nuts to form mast. The mast is tied to the building with tie-in and is the guide rail of the cage. According to the user`s or circumstance`s request, surface of mast is hot dip galvanized, which can prevent it rusting.
The tie-in(wall tie) is the linked part between mast and building, to keep the stabilization of the mast. Distance between the tie-in is about 6~9m alone the mast. There are several types of tie-in. Select one of them according to need, tie-in can adjust the vertical of mast in definite ranges. According to the user`s or circumstance`s request, surface of the tie-in is hot dip galvanized, which can prevent it rusting.
The cage dimension(L×W×H)(m): 3×1.5×2.5. We can also manufacture cages of other size according to the user`s needs. The material of the cage and the door material can be steel wire weave, aluminum-plastic panel, punched-plate, figured aluminum board or other type according to user`s needs. The gate is equipped with drawing gate,include small turn over gate.
Construction Hoist Mast Section,Construction Elevator Mast Section,Passenger Hoist Cage,Construction Hoist Wall Tie, Construction Hoist Anchorage Frame
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.bq-cranes.com