China Automotive Network Road Sweeper Columns Listed by the Ministry of Industry and Information Technology of China Road Sweeper Vehicles Announcement All 6 Categories 111 Manufacturers 98 Road Sweeper Brands 770 Sweeper Products, Latest Road Sweeper Announcement, Environmental Notices , fuel announcements, exemption announcements, pictures, news, and the most timely information on prices of road sweepers.
Furika Sweeper Product Name: Furika Sweeper Rated total weight: 6495 Rated quality: 1500,1435 Curing mass: 4865 The maximum speed: 90 (km/h) Approaching departure angle (°): 19/12 Front suspension/rear suspension: 1032/1638 Front passenger (person): 2,3 Number of Springs: 8/9+5,6/8+4 Fuel Type: Diesel Number of tires: 6 Tire specifications: 7.00-16, 6.50-16, 7.00R16, 6.50R16 Front track: 1506 Rear track: 1466 Number of axes: 2 Wheelbase: 3300 Actual volume (cubic) 3.5-4 Overall dimensions (mm): 5970/2000/2380 Chassis manufacturer: Dongfeng Motor Co., Ltd. Isuzu sweeper vehicle Dolika Sweeper Qingling Sweeper Jiangling Sweeper Tianjin Sweeper The engine configuration adopts Guangxi Yuchai Dongfeng Chaoyang Chengdu Yunnei Jiangsu Suda Anhui Quanchai Chengdu Chengfa Performance parameters: Cleaning width: 3.5m, water tank volume: 1m, garbage volume: 3m. When the number of passengers in the cab is 2 persons, the rated load quality is 1500kg, and when the number of passengers in the cab is 3, the rated load quality is 1435kg. Product Configuration: Jiangxi Isuzu Deputy Engine (JX493G, 57KW), Eaton (USA) Cycloid Motor, Stainless Steel Water Tank, Hankang Solenoid Valve Group, Control Switch (France Schneider), Beijing Fan, Hydraulic Tubing (Guangzhou Tianhe), Sprinkler Water Pump (Shanghai Jiaxing Pump) hydraulic cylinder (Shanghai Rundao), hydraulic oil pump imported from Italy; solenoid valve imported from Germany; hydraulic pipeline using German standard technology sealing structure, the key control components using the French Schneider technology original, service life Long, stable and reliable, low failure rate; hydraulic components using integrated superposition design, electro-hydraulic centralized control of the cab, easy to operate; the anti-collision automatic evasion function of the squeegee, can choose the cleaning of the squeegee according to the severity of ground sediment and driving speed Method; suction nozzle for the rear floating, can automatically adjust to uneven conditions on the ground; adjustable spray water spray dust, in the water to eliminate secondary pollution.
Why sweeper uses need to use sweeper? First, the traditional answer: sweeping vehicles used to sweep the floor, washing vehicles used to clean and dry all kinds of ground. Second, the professional answer: Road sweepers not only solve the difficulties but also for the user to obtain more profits. Third, sweeping vehicles can solve the following problems: 1. The health problems of people living in a dusty environment; 2. Environmental indicators required by national laws or local regulations; 3, due to dust or garbage caused by excessive premature damage to the road surface; 4. The problem of dust contamination in the production workshop products; 5. Dust contamination of fixed or moving machinery in the production workshop; Fourth, can bring greater profits (or savings): 1. The cleaning system for sweeping vehicles is equivalent to 6-40 times of manual labor; 2. Reducing the degree of dust pollution to the environment (saving time and money, reducing the manual cleaning of products, cleaning and maintenance of mechanical equipment, and periodic environmental hygiene work, etc.) 3, improve work efficiency, while improving the operator's work enthusiasm; 4. A well-groomed environment not only improves the image of the city, but is also more conducive to the construction of urban culture and the enthusiasm of the citizens. V. Comparison of mechanical and manual sweeper vehicles 1, the work efficiency, the same area of ​​work time greatly reduced; 2, the cost of cleaning, it is certain that the cleaning cost of the mechanical unit area is even lower than the manual; 3, cleaning effect, machinery can avoid the uneven use of cleaning agents, cleaning effect is not uniform; 4, safety performance, so that the cleaners are in a safe environment (too many vehicles on the road, their own safety awareness is not strong) 5, economic return, taking a car as an example, how much money it spent on the day it stopped using is its real price. In addition to investment costs, there are operating costs and manpower costs.
Road sweeper maintenance 1, in order to avoid operating mistakes, sweeping vehicle control valve is mainly divided into the main valve and the secondary valve. Then where are the two main types of valves, where the power of the main valve comes from the chassis of the sweeper vehicle and the power of the secondary valve comes from the secondary engine of the dedicated functional part. Common road sweeper deputy engines include Chaochai, Jiangling and Cummins. The main valve manages the tilting of the shell behind the chassis and the hydraulic switch on the rear door of the compartment. The secondary valve manages the operation of the four floor brushes (which can individually control one side or all of the work) and the suction cup of the sweeper. 2, The secondary engine of the road sweeper is different because the engine brand is selected for different power, but the general speed is around 1500 to 1800 rpm. 3, according to the needs of the work can generally choose whether you need to bring the function of water spray dust, conventional configuration generally comes with post-spray, at the same time need to pay attention to the clean water tank is enough water, the general clean water tank capacity is different, there may be a gap in working time. 4. The pressure adjustment of the electromagnetic multi-way valve of the road sweeper is generally on the overflow valve. Users can adjust the pressure appropriately to change the speed of the sweep brush. 5, In addition, according to the road conditions, the sweeping vehicle can select whether the left and right brushes of the vehicle work at the same time. For example, if the sweeping corner is only used to open the corner, the brush is turned to work. 6, dust bins may have small dust deposits in the dust bins of the sweeping vehicles, and manual manual handling is required when cleaning the dust bins. 7. The distance between the sucker of the sweeping vehicle and the ground should be adjusted according to the condition of the road section. 8, sweeping vehicle dust suction pipe may often have dust and mud adhesion, need to be cleaned regularly to achieve better results. 9, the electrical parts in the control box need to be replaced in order to use a more stable one. 10. Sanitation workers should regularly check whether the functional parts are normal. 11, in order to avoid the foreign matter in the hydraulic oil will affect the normal operation of the electromagnetic control valve, sanitation workers should regularly check the hydraulic oil is normal. 12. Check whether the limit device of the clutch electric push rod of the secondary engine of the vehicle is normal. 13, sweeping car control button when the time interval should be 5 seconds 14. When a hydraulic part of the road sweeper is not working properly, check the circuit first and then check the circuit. (1) The possible causes of the abnormal circuit part are: disconnection of insurance, loose connection of circuit, broken line (2) The possible causes of the abnormal oil line may include: failure of the oil pump, rupture of the oil pipe, or oil leakage at the oil line connection, or malfunction of the solenoid valve.
Operation procedure 1: Cleaning work 1 Turn on the power of the control box and point the control valve to the sub valve position 2 Start the auxiliary machine 3 Turn the slave clutch control button to the closed position and the fan starts to work 4 Point the vacuum box control to a lowered position 5 Point the left or right control to the down position 6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right) 7 Point the left spray, right spray, and rear spray water control knobs to the open position 8 Point the pump control knob to the open position 9 The vehicle travels at the appropriate speed and starts cleaning action 2: The end of sweeping 1 The vehicle stops driving 2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position 3 Point the broom control to the middle 4 Point the swash plate control to the ascending position and then to the middle position 5 Point the vacuum box control knob up and then back to the middle position 6 Point the secondary engine clutch control knob to the sub-position and then to the middle position 7 Point the control valve control button to the middle position 8 Shutdown the secondary engine 9 Turn off the power to the control box. 3: Unload the trash 1 Turn on the power to the control box, and point the control valve's control button to the position of the main valve. 2 Start the vehicle's main engine 3 Depress the vehicle clutch 4 Open the vehicle's additional oil pump clutch switch (pull outward) 5 Loosen the vehicle clutch at an appropriate speed 6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds 7 Point the car control button to the up position. At any time according to the inclination of the car box, you can point the control button to the middle position. At this time, the car tilts up and stops. 8 Garbage Cleaning 9 When the garbage is cleaned, point the control button of the car to the lowered position. After the car is fully returned, point the control button to the middle position. 10 Point the rear door control to the off position, and then to the middle position after 10 seconds 11 Clean up the end of rubbish 12 Depress the vehicle clutch 13 Close the additional pump clutch control knob (pull inwards) 14 Loosen the vehicle clutch at an appropriate speed 15 Point the control valve of the control box to the middle position 16 Switch off the control box
We always holding the idea of "top quality,competitive price and the best service"
Furika Sweeper Product Name: Furika Sweeper
Furika Sweeper
Why sweeper uses need to use sweeper? First, the traditional answer: sweeping vehicles used to sweep the floor, washing vehicles used to clean and dry all kinds of ground. Second, the professional answer: Road sweepers not only solve the difficulties but also for the user to obtain more profits. Third, sweeping vehicles can solve the following problems: 1. The health problems of people living in a dusty environment; 2. Environmental indicators required by national laws or local regulations; 3, due to dust or garbage caused by excessive premature damage to the road surface; 4. The problem of dust contamination in the production workshop products; 5. Dust contamination of fixed or moving machinery in the production workshop; Fourth, can bring greater profits (or savings): 1. The cleaning system for sweeping vehicles is equivalent to 6-40 times of manual labor; 2. Reducing the degree of dust pollution to the environment (saving time and money, reducing the manual cleaning of products, cleaning and maintenance of mechanical equipment, and periodic environmental hygiene work, etc.) 3, improve work efficiency, while improving the operator's work enthusiasm; 4. A well-groomed environment not only improves the image of the city, but is also more conducive to the construction of urban culture and the enthusiasm of the citizens. V. Comparison of mechanical and manual sweeper vehicles 1, the work efficiency, the same area of ​​work time greatly reduced; 2, the cost of cleaning, it is certain that the cleaning cost of the mechanical unit area is even lower than the manual; 3, cleaning effect, machinery can avoid the uneven use of cleaning agents, cleaning effect is not uniform; 4, safety performance, so that the cleaners are in a safe environment (too many vehicles on the road, their own safety awareness is not strong) 5, economic return, taking a car as an example, how much money it spent on the day it stopped using is its real price. In addition to investment costs, there are operating costs and manpower costs.
Road sweeper maintenance 1, in order to avoid operating mistakes, sweeping vehicle control valve is mainly divided into the main valve and the secondary valve. Then where are the two main types of valves, where the power of the main valve comes from the chassis of the sweeper vehicle and the power of the secondary valve comes from the secondary engine of the dedicated functional part. Common road sweeper deputy engines include Chaochai, Jiangling and Cummins. The main valve manages the tilting of the shell behind the chassis and the hydraulic switch on the rear door of the compartment. The secondary valve manages the operation of the four floor brushes (which can individually control one side or all of the work) and the suction cup of the sweeper. 2, The secondary engine of the road sweeper is different because the engine brand is selected for different power, but the general speed is around 1500 to 1800 rpm. 3, according to the needs of the work can generally choose whether you need to bring the function of water spray dust, conventional configuration generally comes with post-spray, at the same time need to pay attention to the clean water tank is enough water, the general clean water tank capacity is different, there may be a gap in working time. 4. The pressure adjustment of the electromagnetic multi-way valve of the road sweeper is generally on the overflow valve. Users can adjust the pressure appropriately to change the speed of the sweep brush. 5, In addition, according to the road conditions, the sweeping vehicle can select whether the left and right brushes of the vehicle work at the same time. For example, if the sweeping corner is only used to open the corner, the brush is turned to work. 6, dust bins may have small dust deposits in the dust bins of the sweeping vehicles, and manual manual handling is required when cleaning the dust bins. 7. The distance between the sucker of the sweeping vehicle and the ground should be adjusted according to the condition of the road section. 8, sweeping vehicle dust suction pipe may often have dust and mud adhesion, need to be cleaned regularly to achieve better results. 9, the electrical parts in the control box need to be replaced in order to use a more stable one. 10. Sanitation workers should regularly check whether the functional parts are normal. 11, in order to avoid the foreign matter in the hydraulic oil will affect the normal operation of the electromagnetic control valve, sanitation workers should regularly check the hydraulic oil is normal. 12. Check whether the limit device of the clutch electric push rod of the secondary engine of the vehicle is normal. 13, sweeping car control button when the time interval should be 5 seconds 14. When a hydraulic part of the road sweeper is not working properly, check the circuit first and then check the circuit. (1) The possible causes of the abnormal circuit part are: disconnection of insurance, loose connection of circuit, broken line (2) The possible causes of the abnormal oil line may include: failure of the oil pump, rupture of the oil pipe, or oil leakage at the oil line connection, or malfunction of the solenoid valve.
Operation procedure 1: Cleaning work 1 Turn on the power of the control box and point the control valve to the sub valve position 2 Start the auxiliary machine 3 Turn the slave clutch control button to the closed position and the fan starts to work 4 Point the vacuum box control to a lowered position 5 Point the left or right control to the down position 6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right) 7 Point the left spray, right spray, and rear spray water control knobs to the open position 8 Point the pump control knob to the open position 9 The vehicle travels at the appropriate speed and starts cleaning action 2: The end of sweeping 1 The vehicle stops driving 2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position 3 Point the broom control to the middle 4 Point the swash plate control to the ascending position and then to the middle position 5 Point the vacuum box control knob up and then back to the middle position 6 Point the secondary engine clutch control knob to the sub-position and then to the middle position 7 Point the control valve control button to the middle position 8 Shutdown the secondary engine 9 Turn off the power to the control box. 3: Unload the trash 1 Turn on the power to the control box, and point the control valve's control button to the position of the main valve. 2 Start the vehicle's main engine 3 Depress the vehicle clutch 4 Open the vehicle's additional oil pump clutch switch (pull outward) 5 Loosen the vehicle clutch at an appropriate speed 6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds 7 Point the car control button to the up position. At any time according to the inclination of the car box, you can point the control button to the middle position. At this time, the car tilts up and stops. 8 Garbage Cleaning 9 When the garbage is cleaned, point the control button of the car to the lowered position. After the car is fully returned, point the control button to the middle position. 10 Point the rear door control to the off position, and then to the middle position after 10 seconds 11 Clean up the end of rubbish 12 Depress the vehicle clutch 13 Close the additional pump clutch control knob (pull inwards) 14 Loosen the vehicle clutch at an appropriate speed 15 Point the control valve of the control box to the middle position 16 Switch off the control box
Specification:
Long Life Span,High Quality
100% Waterproof
Engry Saving,Low Temperature
Good Color Rendering
DOT,E-Mark Approval
Using Scope: Truck Rear Lights , Trailer Rear LightsTruck Tail Lights,Trailer Tail Lights,Tail Lights for Truck,Tail Lights For Trailer
Truck Combination Tail Light, Truck Marker Lights, Truck Marker Light, Trailer Boat Tail Lights, Trailer Combination Lights
Our company is a professional truck and trailer lamps manufacturer for more than 10 years, especially in producing and designing all kinds of lamps, such as auto lamps, auto light with our own technology and development team.We always holding the idea of "top quality,competitive price and the best service"
Company Profile And Workshop Equipment:
Truck Trailer Lamps,Truck Rear Lights,Trailer Rear Lights,Truck Tail Lights,Trailer Tail Lights,Tail Lights For Trailer
Shaoxing Groupstar Electric Appliance Co., Ltd. , http://www.led-auto-lamps.com