- Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
- Has connector to foot control, convenient for workers'Â operation.
- Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
- High duty cycle, may work continuously with high current.
- Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.
Parameter/Specification
Â
| Model Item      | TIG 315P AC/DC |
| Voltage(V) | AC380V ±15% |
| Frequency(Hz) | 50-60 |
| Input Power(KVA) | 8.3 |
| No-load Voltage(V) | 54 |
| Current Range(A) | 10-300 |
| Rated Duty Cycle | 60% |
| Applied Welding Rod(mm) | ¢1.6-5.0 |
| Pre-flow time(S) | 2 |
| Post-flow time(S) | 0-10 |
| Down slope(S) | 0-10 |
| AC Balance(%) | 20-80 |
| AC Frequency(Hz) | 60 |
| Pulse Frequency(Hz) | 0.5-300 |
| Power Factor | 0.93 |
| Efficiency(%) | 85 |
| Insulation Grade | F |
| Housing Protection Grade | IP21S |
| Weight(Kg) | 30 |
| (L*W*H)(mm) | 535*360*460 |
| Carton CBM(m3) | 0.172 |
| Specification | |
| Â Capacitor | 470Uf/400V*6 |
| MOSFET | TOSHIBA K3878*24 |
| Output Rectifier | SL D92-02*24 |
                   Front ViewÂ
                           Right ViewÂ
                          Left ViewÂ
                              Top ViewÂ
                                        Back ViewÂ
                                  Accessories
Â
- Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
- Has connector to foot control, convenient for workers'Â operation.
- Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
- High duty cycle, may work continuously with high current.
- Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.
Parameter/Specification
Â
| Model Item      | TIG 315P AC/DC |
| Voltage(V) | AC380V ±15% |
| Frequency(Hz) | 50-60 |
| Input Power(KVA) | 8.3 |
| No-load Voltage(V) | 54 |
| Current Range(A) | 10-300 |
| Rated Duty Cycle | 60% |
| Applied Welding Rod(mm) | ¢1.6-5.0 |
| Pre-flow time(S) | 2 |
| Post-flow time(S) | 0-10 |
| Down slope(S) | 0-10 |
| AC Balance(%) | 20-80 |
| AC Frequency(Hz) | 60 |
| Pulse Frequency(Hz) | 0.5-300 |
| Power Factor | 0.93 |
| Efficiency(%) | 85 |
| Insulation Grade | F |
| Housing Protection Grade | IP21S |
| Weight(Kg) | 30 |
| (L*W*H)(mm) | 535*360*460 |
| Carton CBM(m3) | 0.172 |
| Specification | |
| Â Capacitor | 470Uf/400V*6 |
| MOSFET | TOSHIBA K3878*24 |
| Output Rectifier | SL D92-02*24 |
                   Front ViewÂ
                           Right ViewÂ
                          Left ViewÂ
                              Top ViewÂ
                                        Back ViewÂ
                                  Accessories
Â
Components of Cnc Steel Coil Slitting Line
Slitting line is mainly used to slit kinds of wide steel strip into certain width, then recoil them to meet the request of various procedure for welded pipe and cold rolled section steel.
1.Hydraulic coil car
2.Hydraulic decoiler
3.Hydraulic guiding and press, pinch and pre-leveling device
4.Head-Cutting Machine
5.Looper I
6.Slitting machine
7.Scrap winder
8. Looper II
9.Tension stand---damping device for pre-dividing and pressing
10.Recoiler
11.Hydraulic unload car
12.Elecronic control system
13.Hydraulic system
The main technique parameters
No.
Type
Thickness
Coil weight
Roll plate width ()
Cutting speed
Installed capacity
Floor area
1
ZJ-1
0.18-1.2mm
10tons
500-1250mm
80-150m/min
100kw
12x30 M2
2
ZJ-2
0.3-2mm
15tons
900-1250mm
50-100m/min
150kw
12x30M2
3
ZJ-3
0.8-4mm
20tons
1000-1500mm
40-80m/min
175kw
12x30M2
4
ZJ-4
2-6mm
20tons
1000-1550mm
30-60m/min
200kw
12x30M2
5
ZJ-5
4-10mm
30tons
1000-1550mm
20-40m/min
480kw
12x40M2
6
ZJ-6
4-12.7mm
30tons
1000-1550 mm
20-40m/min
550kw
12x40M2
7
ZJ-7
5-14mm
30tons
1000-1700mm
15-30m/min
600kw
16x50M2
8
ZJ-8
6-16mm
35tons
1200-2000mm
12.5-25m/min
650kw
16x50M2
CNC Steel Coil Slitting Line
Cnc Steel Coil Slitting Line,Steel Coil Slitting Machine,Coil Slitting Machine
Shandong Zecheng CNC Machinery Co., Ltd , http://www.zccncmachinery.com