Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds

Model NO.: custom
Driving Motor Type: Permanent Magnet
Mold Cavity Technology: EDM Milling
Milling Speed: Normal Speed
Parts Detection Method: Geometric Detection
Shaping Mode: Die Casting
Surface Finish: Ra 0.8-0.2
Trademark: Hason
Transport Package: Carton
Specification: According to customer′s requirment
Origin: Guangdong, China
HS Code: 8501109101
Model NO.: custom
Driving Motor Type: Permanent Magnet
Mold Cavity Technology: EDM Milling
Milling Speed: Normal Speed
Parts Detection Method: Geometric Detection
Shaping Mode: Die Casting
Surface Finish: Ra 0.8-0.2
Trademark: Hason
Transport Package: Carton
Specification: According to customer′s requirment
Origin: Guangdong, China
HS Code: 8501109101

 

Material Available: Carbide,Copper,Alloy,ASP23,Vanadis,CPMRTXM4,SKD11,SKD61,HSS,A2,M2,D2SUJ2,S45C,ect
Tolerance: 0.001mm
Hardness: Generally HRC 50-60, depend on material
Machine Type:

Stamping 

Finish: Highly mirror polished finish 6-8 micro.
Standard:
DAYTON, FIBRO, LANE, MISUMI ,DME etc
Special treatment: TiCN,TiN, Tiain,Ticrn,Nitrided,DLC,Black oxygened.etc available
MOQ 1 piece
Max DIA

200mm

Heat treatment: Yes
Customized: Yes
Package: Anti-rust oil + Plastic bag + Carton.    If need any special packing please inform us
Delivery time: 3-5 Working days, depends on the quantity the order. Express by  DHL, UPS, FEDEX, TNT or Ocean Shipping etc.
Trade Term: Ex-works, FOB Shenzhen, CIF etc.,
Payment Term:     By T/T(Deposit 30% and Balance 70% after shipment against the copy of doc. ( B/L,I/V,PL )


Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds
Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds



Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds
 

Instruction & Maintenance: 

Mould parts regular maintenance for mould's lifespan effect mostly.The the question is: how do we do the maintenance job while using the parts?

Step 1. Make sure you have a vacuum machine to clear the scrap automatically and regularly, if the scrap clearned well, the broken rate on punch pin will be smaller.

Step 2.Make sure the density of the oil is correct, not too sticky or attenuate.

Step 3. If punch die and die edge have wear issue should stop using, and grinding in time , otherwise it will wear rapidly expanding edge of the mold, and reduce the lifespan of mould and parts.

Step 4. Ensure the life of the mold, the spring also should regularly replaced, prevent spring will damage and affect the use of mold.


Products Show 

Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds



 

Our factory:

Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds


These products are showed here only to present the capability of our business activities.

Hason manufactures a full line of standard and customized punch products, carbide punches, punch pins, bushings, ejector pins, step pins and other mould accessories and die parts etc.

Our company specialized in manufacturing and designing of various non-standard precision parts, our service cover mechanical engineering, electronic engineering, semiconductor, tele-communication, medical equipment, automation equipments etc. We invested advanced manufacturing equipments(such as high-speed CNC Machining Center, Grinding machines, Milling machines, NC lathe, Stamping machine, Wire-Cutting machines)and quality testing machines(such as coordinate measurement machine, Micro-projector and Height Gauge etc. ) we can also provide one-stop shopping OEM. 

Hason can offers 2D shapes custom Punches manufactured to your specifications

1. All parts produced according to your CAD and 3D drawings or sample. Please send the blueprint or drawing artwork firstly, we will offer our quotation to you within 2 days. 
2. Materials as below. 
Aluminum, Stainless steel, 17-4pH, DERLIN, Ceramics, Carbamide alloy, PEEK etc
3. The surface finished include: 
Hardness anodizing black/clear, steel oxidizing dark-blue, electro-polishing, electroless nickel plating, silver plating, golden plating etc. 
4. OEM&ODM are welcomed. 
5. Packing: Wooden cases, carton or on requirement. 
6. Main equipment: 
Machining center, CNC, Lathe, Turning machine, Milling machine, Drilling machine, Internal and external grinding machine, Cylindrical grinding machine, Tapping drilling machine, Wire cutting machine etc. 
7. Testing facility: Coordinate measuring machine, projector, roughness tester, hardness tester, concentricity tester. Height tester, 
8. Part size: Diameter from 0.5mm to 150mm
9. Tolerance: +/-0.02mm
10, Lead time: 15-25days after the confirmation of sample
11: Minimum Order: Comply with customer's demand
12, Delivery way: EXPRESS, BY SEA OR BY AIR on your requirement. 



Hason Mold Precision Spare Parts for Auto Mould

Packaging:

1,soft foam to prevent the surface being scratched in one small carboard boxes, several small boxes in one larger hard carboard with fills to avoid a slope, besides hard carboard is easy to load and transport

2, we can also arrange packaging according to your special requirements or discuss

3,product code on cardboards instead of any company information such as logo to keep deal information secret and beneficial to customs clearance


Shipping:

There are three ways to be choose, as follows:

1,International Express: UPS,TNT,DHC

2,Port transportation: all ports

3,We delivery products according to customer's requirements and paid by buyer after the destination confirmation

4,take insurance for the goods according to contract


All parts can be machined with tiny tolerance, precise dimensions and a smooth surface. Roughness typically considered to be the high frequency, short wavelength component of a measured surface. 

Welcome to contact with us! We will provide you with better service!
 

 

Material Available: Carbide,Copper,Alloy,ASP23,Vanadis,CPMRTXM4,SKD11,SKD61,HSS,A2,M2,D2SUJ2,S45C,ect
Tolerance: 0.001mm
Hardness: Generally HRC 50-60, depend on material
Machine Type:

Stamping 

Finish: Highly mirror polished finish 6-8 micro.
Standard:
DAYTON, FIBRO, LANE, MISUMI ,DME etc
Special treatment: TiCN,TiN, Tiain,Ticrn,Nitrided,DLC,Black oxygened.etc available
MOQ 1 piece
Max DIA

200mm

Heat treatment: Yes
Customized: Yes
Package: Anti-rust oil + Plastic bag + Carton.    If need any special packing please inform us
Delivery time: 3-5 Working days, depends on the quantity the order. Express by  DHL, UPS, FEDEX, TNT or Ocean Shipping etc.
Trade Term: Ex-works, FOB Shenzhen, CIF etc.,
Payment Term:     By T/T(Deposit 30% and Balance 70% after shipment against the copy of doc. ( B/L,I/V,PL )


Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds
Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds



Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds
 

Instruction & Maintenance: 

Mould parts regular maintenance for mould's lifespan effect mostly.The the question is: how do we do the maintenance job while using the parts?

Step 1. Make sure you have a vacuum machine to clear the scrap automatically and regularly, if the scrap clearned well, the broken rate on punch pin will be smaller.

Step 2.Make sure the density of the oil is correct, not too sticky or attenuate.

Step 3. If punch die and die edge have wear issue should stop using, and grinding in time , otherwise it will wear rapidly expanding edge of the mold, and reduce the lifespan of mould and parts.

Step 4. Ensure the life of the mold, the spring also should regularly replaced, prevent spring will damage and affect the use of mold.


Products Show 

Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds



 

Our factory:

Carbide Steel Insert Sleeve Insert Bushings for Fastener Moulds


These products are showed here only to present the capability of our business activities.

Hason manufactures a full line of standard and customized punch products, carbide punches, punch pins, bushings, ejector pins, step pins and other mould accessories and die parts etc.

Our company specialized in manufacturing and designing of various non-standard precision parts, our service cover mechanical engineering, electronic engineering, semiconductor, tele-communication, medical equipment, automation equipments etc. We invested advanced manufacturing equipments(such as high-speed CNC Machining Center, Grinding machines, Milling machines, NC lathe, Stamping machine, Wire-Cutting machines)and quality testing machines(such as coordinate measurement machine, Micro-projector and Height Gauge etc. ) we can also provide one-stop shopping OEM. 

Hason can offers 2D shapes custom Punches manufactured to your specifications

1. All parts produced according to your CAD and 3D drawings or sample. Please send the blueprint or drawing artwork firstly, we will offer our quotation to you within 2 days. 
2. Materials as below. 
Aluminum, Stainless steel, 17-4pH, DERLIN, Ceramics, Carbamide alloy, PEEK etc
3. The surface finished include: 
Hardness anodizing black/clear, steel oxidizing dark-blue, electro-polishing, electroless nickel plating, silver plating, golden plating etc. 
4. OEM&ODM are welcomed. 
5. Packing: Wooden cases, carton or on requirement. 
6. Main equipment: 
Machining center, CNC, Lathe, Turning machine, Milling machine, Drilling machine, Internal and external grinding machine, Cylindrical grinding machine, Tapping drilling machine, Wire cutting machine etc. 
7. Testing facility: Coordinate measuring machine, projector, roughness tester, hardness tester, concentricity tester. Height tester, 
8. Part size: Diameter from 0.5mm to 150mm
9. Tolerance: +/-0.02mm
10, Lead time: 15-25days after the confirmation of sample
11: Minimum Order: Comply with customer's demand
12, Delivery way: EXPRESS, BY SEA OR BY AIR on your requirement. 



Hason Mold Precision Spare Parts for Auto Mould

Packaging:

1,soft foam to prevent the surface being scratched in one small carboard boxes, several small boxes in one larger hard carboard with fills to avoid a slope, besides hard carboard is easy to load and transport

2, we can also arrange packaging according to your special requirements or discuss

3,product code on cardboards instead of any company information such as logo to keep deal information secret and beneficial to customs clearance


Shipping:

There are three ways to be choose, as follows:

1,International Express: UPS,TNT,DHC

2,Port transportation: all ports

3,We delivery products according to customer's requirements and paid by buyer after the destination confirmation

4,take insurance for the goods according to contract


All parts can be machined with tiny tolerance, precise dimensions and a smooth surface. Roughness typically considered to be the high frequency, short wavelength component of a measured surface. 

Welcome to contact with us! We will provide you with better service!
Â