Automatic Motorcyle/Bicycle Tyre Spring Turn-up Building Machine

Model NO.: M/C-STB
Trademark: Suiteque
Specification: 3800*2260*1930
Origin: Qingdao
HS Code: 84778000
Model NO.: M/C-STB
Trademark: Suiteque
Specification: 3800*2260*1930
Origin: Qingdao
HS Code: 84778000
  Chafer servicer (for skin wall). Hot Knife Heater
1.

The building drum has very good precision

and no wear off trouble for long terms operation.

2. The building drum has special design with fingers device (36 pcs turn up fingers on the one side of durm, total 72pcs in one durm) so it can make very smooth nylon cord turn up and will not cause nylon cord angle change. It will promote tire quality.
3. The building drum has special design ----no gap rubber band which will produce very tough green tire on bead positions so it can reduce the blister problem on the sidewall and bead position.
4. The building drum has special design for three steps expansion. 
1st step is reduction to minimum diameter for easy to take out the green tire from builing drum.
2nd step is expansion to middle diameter of building drum for apply the nylon cord & bead setting.
3rd setp is expansion to excatly diameter & bead goes into bead groove then overlape turn up then apply tread & stitching the tread.
5. The splicing position of nylon cord & tread is controlled to be applied in the opposite side to get the better balance of tire.
6. Special design with patent tread stitching device which will more effectly stitch tread tightly.
7. Bead setting ring equipped with strong magnets will rapidly and precisely hold bead wire on right position.
8. Special design of tread guider which will be very easy and accurate to align the tread to drum cent

 The technical parameter is as follows:
 

Product Type M/C-STB0815 M/C-STB1621
Forming mode Flat drum expansion Flat drum expansion
Applicable tire size(inches) 8~15" 16~21"
Servicer layers(layer) 4 4
Ply width(mm) ≤500 ≤500
Ply roll diamete(mm) ≤450 ≤450
Liner cloth diameter(mm) ≤250 ≤250
Building machine speed(r/min) 35/120 35/120
Motor Power(KW) Host 2.2  servicer 0.75*4 Host 2.2  servicer 0.75*4
Dimension (L*W*H)(mm) 3800*2260*1930 3800*2260*1930
Weight(kg) 3800 3300

Automatic Motorcyle/Bicycle Tyre Spring Turn-up Building MachineAutomatic Motorcyle/Bicycle Tyre Spring Turn-up Building Machine

Our Services

We can provide better service to you:

1.Adopting reasonable packaging suit for long ocean transport.

2.Can offer the raw material constantly according to the buyer's requirements.

3.Train you how to operate the machine.

4.Provide overseas maintenance and plant design.

5.Offer technical support.

Company Information

  Shandong Xuqing Machinery Technology Co.,Ltd is located in the industrial park of Linjiacun town ,Zhucheng, Weifang city, with 10 million RMB registered capital, company covers an area of 20000 square meters with 26 professional and technical engineers and 3 senior engineers. The company is committed to the production and development of full-automatic complete sets of inner tube and tyre equipments of motorcycles, bicycles, electric vehicles series. The technical engineers have working experience in large tyre enterprise and can design suitable tyre process equipment for production as per customers' requirements. Also they can provide new factory site planning and other services.

  The company's main products are: Rubber kneader, rubber mixing mill, rubber sheet cooling machine, rubber extruder, full-automatic tire tread production line,  automatic tyre inner tube production line,motorcycle inner tube jointing machine, motorcycle automatic building tire machine, tyre vulcanizing machine, horizontal cloth cutting machine, steel wire circle molding machine...The products have been sold to 20 provinces in China and exported to more than 10 countries and areas. The stable quality and timely service obtain the positive feedback and are high praised.

  "Quality, integrity, innovation, service" is the aim of our company. We would like to cooperate sincerely with new and old national customers and foreign clients and seek common development!
 

    All friends are welcome to visit us and faithfully hope to enter into business relations with you.

Automatic Motorcyle/Bicycle Tyre Spring Turn-up Building Machine

FAQ

1.Q:Are you a manufacture or trading company?

   A:We are the manufacture. We have our own plant, workers and technical research developing department.

 

2.Q:What are your hot sale machine?

   A:Our rubber machines are popular in the foreign market. And main products are the motorcycle, electric bike and bicycle tyre making machines.

 

3.Q:How do you control the quality ?

   A:Quality is priority and we have our own quality control system. We will make a strict inspection before the machines leave the factory.

 

4.Q:All the technical parameters is fixed?

   A:Basically, each model corresponding to the related machine.

      Designing and compounding special specification products can be offered according to the customers'  requirements

 

Why choose us?

1.    We are China rubber professional machinery manufacture and  have high technology research and development team.

2.    We are a member of Alibaba Trade Assurance which is a new service provided by Alibaba, safeguarding buyer's payment to suppliers to ensure suppliers fulfill their obligations regarding order delivery and product quality.

3. 100% QC inspection before shipment.

4. Better quality, better service with competitive price.

 

Contact Albert for Question NOW:

Automatic Motorcyle/Bicycle Tyre Spring Turn-up Building Machine



 

  Chafer servicer (for skin wall). Hot Knife Heater
1.

The building drum has very good precision

and no wear off trouble for long terms operation.

2. The building drum has special design with fingers device (36 pcs turn up fingers on the one side of durm, total 72pcs in one durm) so it can make very smooth nylon cord turn up and will not cause nylon cord angle change. It will promote tire quality.
3. The building drum has special design ----no gap rubber band which will produce very tough green tire on bead positions so it can reduce the blister problem on the sidewall and bead position.
4. The building drum has special design for three steps expansion. 
1st step is reduction to minimum diameter for easy to take out the green tire from builing drum.
2nd step is expansion to middle diameter of building drum for apply the nylon cord & bead setting.
3rd setp is expansion to excatly diameter & bead goes into bead groove then overlape turn up then apply tread & stitching the tread.
5. The splicing position of nylon cord & tread is controlled to be applied in the opposite side to get the better balance of tire.
6. Special design with patent tread stitching device which will more effectly stitch tread tightly.
7. Bead setting ring equipped with strong magnets will rapidly and precisely hold bead wire on right position.
8. Special design of tread guider which will be very easy and accurate to align the tread to drum cent

 The technical parameter is as follows:
 

Product Type M/C-STB0815 M/C-STB1621
Forming mode Flat drum expansion Flat drum expansion
Applicable tire size(inches) 8~15" 16~21"
Servicer layers(layer) 4 4
Ply width(mm) ≤500 ≤500
Ply roll diamete(mm) ≤450 ≤450
Liner cloth diameter(mm) ≤250 ≤250
Building machine speed(r/min) 35/120 35/120
Motor Power(KW) Host 2.2  servicer 0.75*4 Host 2.2  servicer 0.75*4
Dimension (L*W*H)(mm) 3800*2260*1930 3800*2260*1930
Weight(kg) 3800 3300

Automatic Motorcyle/Bicycle Tyre Spring Turn-up Building MachineAutomatic Motorcyle/Bicycle Tyre Spring Turn-up Building Machine

Our Services

We can provide better service to you:

1.Adopting reasonable packaging suit for long ocean transport.

2.Can offer the raw material constantly according to the buyer's requirements.

3.Train you how to operate the machine.

4.Provide overseas maintenance and plant design.

5.Offer technical support.

Company Information

  Shandong Xuqing Machinery Technology Co.,Ltd is located in the industrial park of Linjiacun town ,Zhucheng, Weifang city, with 10 million RMB registered capital, company covers an area of 20000 square meters with 26 professional and technical engineers and 3 senior engineers. The company is committed to the production and development of full-automatic complete sets of inner tube and tyre equipments of motorcycles, bicycles, electric vehicles series. The technical engineers have working experience in large tyre enterprise and can design suitable tyre process equipment for production as per customers' requirements. Also they can provide new factory site planning and other services.

  The company's main products are: Rubber kneader, rubber mixing mill, rubber sheet cooling machine, rubber extruder, full-automatic tire tread production line,  automatic tyre inner tube production line,motorcycle inner tube jointing machine, motorcycle automatic building tire machine, tyre vulcanizing machine, horizontal cloth cutting machine, steel wire circle molding machine...The products have been sold to 20 provinces in China and exported to more than 10 countries and areas. The stable quality and timely service obtain the positive feedback and are high praised.

  "Quality, integrity, innovation, service" is the aim of our company. We would like to cooperate sincerely with new and old national customers and foreign clients and seek common development!
 

    All friends are welcome to visit us and faithfully hope to enter into business relations with you.

Automatic Motorcyle/Bicycle Tyre Spring Turn-up Building Machine

FAQ

1.Q:Are you a manufacture or trading company?

   A:We are the manufacture. We have our own plant, workers and technical research developing department.

 

2.Q:What are your hot sale machine?

   A:Our rubber machines are popular in the foreign market. And main products are the motorcycle, electric bike and bicycle tyre making machines.

 

3.Q:How do you control the quality ?

   A:Quality is priority and we have our own quality control system. We will make a strict inspection before the machines leave the factory.

 

4.Q:All the technical parameters is fixed?

   A:Basically, each model corresponding to the related machine.

      Designing and compounding special specification products can be offered according to the customers'  requirements

 

Why choose us?

1.    We are China rubber professional machinery manufacture and  have high technology research and development team.

2.    We are a member of Alibaba Trade Assurance which is a new service provided by Alibaba, safeguarding buyer's payment to suppliers to ensure suppliers fulfill their obligations regarding order delivery and product quality.

3. 100% QC inspection before shipment.

4. Better quality, better service with competitive price.

 

Contact Albert for Question NOW:

Automatic Motorcyle/Bicycle Tyre Spring Turn-up Building Machine



 

AS2129 Flanges

AS2129 Flanges,Table Flanges,Table D Flanges,Table E Flanges

Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.zhongnuoflange.com