There are a Centrifugal wheel intelligent deceleration device inside of the head of generator. It make the wind turbine will not overspeed running at large wind spped, the generator can output power normally within the range of rated rotate speed, also avoid wind turbine braking or stopping on the condition of large wind speed. The efficiency and safety of full system have been improved for much, and also can protect the controller and inverter, extend the working life of batteries.
| Parameter | |
| diameter of wind wheel | 7.4m |
| material of blades | Fiberglass-Reinforced Plastics |
| blades number | 3 |
| RPM | 200r/min |
| rated wind speed | 13m /s |
| start up wind speed | 3m /s |
| working wind speed | 3-30m/s |
| survival wind speed | 50m /s |
| generator style | 3-phase AC PMG |
| protection grade of PMG | IP54 |
| material of generator case | Q23 |
| rated power | 10kw |
| the max. power | 12kw |
| rated voltage (DC) | 220v / 380v |
| the height of tower | 12m |
| guy cable tower type | 273mm +Â 219mm |
| top weight(generator+blades) | 460kg |
| brake type | Centrifugal wheel intelligent slowing down |
| controller and inverter | advanced wind & solar hybrid controller, pure sine wave inverter /on grid |
| battery reference | 12V150ah,30pcs |
There are a Centrifugal wheel intelligent deceleration device inside of the head of generator. It make the wind turbine will not overspeed running at large wind spped, the generator can output power normally within the range of rated rotate speed, also avoid wind turbine braking or stopping on the condition of large wind speed. The efficiency and safety of full system have been improved for much, and also can protect the controller and inverter, extend the working life of batteries.
| Parameter | |
| diameter of wind wheel | 7.4m |
| material of blades | Fiberglass-Reinforced Plastics |
| blades number | 3 |
| RPM | 200r/min |
| rated wind speed | 13m /s |
| start up wind speed | 3m /s |
| working wind speed | 3-30m/s |
| survival wind speed | 50m /s |
| generator style | 3-phase AC PMG |
| protection grade of PMG | IP54 |
| material of generator case | Q23 |
| rated power | 10kw |
| the max. power | 12kw |
| rated voltage (DC) | 220v / 380v |
| the height of tower | 12m |
| guy cable tower type | 273mm +Â 219mm |
| top weight(generator+blades) | 460kg |
| brake type | Centrifugal wheel intelligent slowing down |
| controller and inverter | advanced wind & solar hybrid controller, pure sine wave inverter /on grid |
| battery reference | 12V150ah,30pcs |
The main components of Shine Core Veneer Dryer is as follows:1.Drying system :the Veneer Dryer adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying 2.Control system: Adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect. 3.Transmission system :the veneer is fed into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks. 4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating,waste wood or other biomass materials. Users can choose one most suitable model. but biomass fuel is the most economic one which can save the drying cost to the user to the most .
Core Veneer Dryer
Branch Shredder,Core Veneer Dryer,Plywood Veneer Dryer,Plywood Veneer Dryer Machine
Shandong Shine Machinery Co.,Ltd , https://www.shinewoodmachine.com