Steel Adhesive Wheel Balance Weights F160

Posted on

Model NO.: F160
Port: Ningbo
Trademark: Hopson
Specification: 50pcs/box, etc. Customized
Origin: Zhengjiang, Ningbo
Model NO.: F160
Port: Ningbo
Trademark: Hopson
Specification: 50pcs/box, etc. Customized
Origin: Zhengjiang, Ningbo

Find HOPSON TYRE REPAIR ®   @  Essen 2016   in Germany during May. 24-27, 2016.

Booth Number.: 11H26


Steel Adhesive Wheel Balance Weights F160

 

We are now looking for worldwide agents for HOPSON TYRE REPAIR. If you are interested, please contact us today.

 

General Info:

 

Part No.: F160

Height:3.0mm(include tape 4.0mm)

Width:19mm

Length:138mm

Packing: 100strips/box, 4box/ctn or 50strips/box, 8boxes/ctn

                  

Description:

 

HOPSON POWER WEIGHT offers a complete range of quality coated, non-coated and adhesive Wheel Weights for passenger cars, motorcycles and trucks. HOPSON Coated Wheel Weights are polyester coated (silver-grey) to prevent material staining on the alloy wheel. HOPSON adhesive wheel weights are pre-cut and require no additional cutting. A simplified organizational system makes wheel weight selection and application easy. Our goal is to become a partner, not just a product supplier. HOPSON POWER WEIGHT guarantee that its products will meet and exceed the highest quality standards in the industry. We are committed to ensuring your success.

 

F160 is 60 grams steel adhesive weight, made up of 4x5 grams and 4x10 grams segments.

 

Surface: Zinc plated and Epoxy coated is available.


Steel Adhesive Wheel Balance Weights F160
Steel Adhesive Wheel Balance Weights F160
Installation of Adhesive Weights:

 

Pre-treating the rim:

Clean the rim thoroughly with a cleaning agent that is compatible with varnish (e.g. IPA 70%) in order to remove any residual grease, silicone or adhesive.

Please note: A minimum of 15ºC is required in terms of both the room temperature and the rim temperature.

 

Pre-bending the weights:

Separate the correct gram (as calculated) from the bar. Mould the shape of the weight to match the rim radius (with protective film).

Please note: You need to bend the weights gradually, otherwise they will break apart at the joins. You should bend the weight to a little more than the rim's radius.

 

Removal of the protective film:

Remove the protective film.

Please note: Do not touch the glued surface after peeling off the rim.

 

Sticking the weight on:

Attach the weight to the calculated point on the rim, making sure that the weight is distributed evenly either side and the weight is parallel with the edge of the rim.

Please note: Press down on the weight hard, working from the center to the left and right. A minimum pressure of 1kg/cm² is required. The angle of the sticking surface should not be higher than 15°C to normal.

 

Points:

  

 1. Excellent balance weight suppliers and professional production.

 2. Neat and compact appearance, popular design well accepted to the market.

 3. Made of steel material, environment friendly.

 4. Zinc plated, provide wonderful surface to fit the rims and anti-rusty.

 5. Superior quality, high standard, good reputation, reasonable price

 6. Fashionable package for safe and easy pick-up.

 7. ISO9001:2008 Certificate

 

 

PLS NOTE: When you send us inquiry letter, kindly pls include the following information if possible:

Part No.:

Qty:

Any detailed requirements!

It will help us reply to you efficiently. Thank you.

 

Samples are available to send. 

 

Don't miss the opportunity to check our full range of tire repair products. 

HOPSON TYRE REPAIR will always surprise you! 

Blush Cream Jar

Plastic blush cream Container, Plastic blush Cream Jar container ,Empty blush cream jar

Plastic blush cream jar,with clear base jar and color injectioned screw top lid . It is use to carry all kinds of cosmetic face blush cream.An empty blush cream container, easy to carry and convenient to use.

Our company provides multiple sizes and different style of blush cream jars: different sizes in dia 50mm and dia 20mm.Suitable for all kinds of face blush cream .Normally the cap is ABS material,base is AS or PETG magerial.Except for the material of jar could be changed according to client's requirement, we could provide service of customzied molding and designing.

The empty container can be also used to carry other cosmetic creams or skin care lotions, etc.

dia 50mm plastic blush cream container ,dia 50mm plastic blush cream jar,

dia 20mm plastic blush cream container,dia 20mm plastic blush cream jar

Plastic Blush Cream Jar,Empty Plastic Blush Cream Container,Mini Cream Case,Mini Cream Container

Dongguan Qingyan Packaging Limited , https://www.qingyanpackaging.com