Manual Suction Sand Blasting Machine
Remark: All Kinds Of Model Sand Blasting Machine Can Custom-Made According To Your Requirements!!
Suction Type Manual Sand Blasting Machine Showing In Stock:
Product Technology Data:
Manual Suction Sand Blasting Machine Technology Data:
| NO. | Suction Type Sand Blasting Machine Technology Data | |||
| 1 | Model | MS-9090 | MS-9060 | MS-6050 |
| 2 | Application | hardware,electronics,mould and some small workpiece surface rust cleaning , Degreasing,deburring,descaling ,cleaning the surface paint,currently widely used for spraying,electroplate pretreatment process to enhance the coating (plating) surface Adhesion. |
||
| 3 | Working Way | Suction Type | ||
| 4 | Machine Size (L*W*H )mm | 700*1000*1600 | 1000*1000*1600 | 700*1000*1600 |
| 5 | Workpiece Size(L*W*H )mm | 900*900*700 | 900*600*600 | 600*500*500 |
| 6 | Dust collector | Electromagnetic pulse dust collector (filter cartridge type) | ||
| 7 | Dedusting  Fan | 750W,220V/50HZ | 550W,220V/50HZ | 550W,220V/50HZ |
| 8 | Floodlight | 50W-LED Explosion-proof  Light | ||
| 9 | Cyclone Separator | 1 PC | ||
| 10 | Foot Switch | 1 PC | ||
| 11 | Solenoid Valve | 1 PC | ||
| 12 | Pressure Regulation Valve | 1 PC | ||
| 13 | Filter +Automatic Emission | 1 Set | ||
| 14 | Pressure | 5-8KG,1m3 | 5-8KG,1m3 | |
| 15 | Cotton Glove | 1 Pairs | ||
| 16 | Low-Voltage Apparatus | Delixi | ||
| 17 | Tube/Valve | 304 stainless steel | ||
| 18 | Paint | White Ripple +Â Lemon Yellow(Automobile paint) | ||
| 19 | Total Power | 0.8KW | 0.6KW | 0.6KW |
| 20 | Total Weight | 0.5T | 0.22T | 0.2T |
| 21 | Work Way | Manual(Siphon Continuous Blasting) | ||
| 22 | Shot Media | Small steel shot,glass shot/sand,ceramic shot /sand,Brown corundum,white corundum etc. | ||
What Is Sand Blasting Machine ?
Manual Suction Sand Blasting Machine Description:Â
1.Abrasive sandblasting is the process of propelling sand at high speeds at an object to remove rust, paint, or other coatings.
2.Other types of abrasive blasting materials exist, such as beads or sodium bicarbonate, but abrasive sandblasting is the specific process of using sand to remove materials.
3.A special machine is necessary to perform this process, and the user of the machine often needs to be trained to use the equipment safely and effectively.
4.The user will also need to wear proper safety equipment, such as gloves, goggles, and a nose and mouth mask, since the sand can be harmful to one's health.
5.The process of abrasive sandblasting starts with prepping an area in which the blasting can take place.
6.Sand will be propelled from the machine, which means it will be necessary for the user to protect the surrounding area.
7.In some cases, the abrasive sandblasting process can be done in a contained environment that is well ventilated, thereby containing all the sand and debris.
8.In other cases, it may be necessary to lay down a tarp or plastic sheet to collect the spent sand and protect other surfaces in the immediate vicinity.
Sand Blasting Machine Application:
Manual Suction Sand Blasting Machine Applications:Â
1.Sand blasting machine are suitable for all metal, plastic and glass products surface treatment.
2.Removing oxide skin,residues burrs and scratches can be used for decoration light, matte and strengthen management.
3.Clean the mold,polishing and atomization treatments of metalwork mold,organic glass and other articles.It features its tungsten steel nozzle with long service life.
Blast Cleaning Including:
1.There are cyclone separation system and dust removal system, separator will separate the abrasive from steel.
2.Dust removal system can deal with and collect the emit useless dust, and can vibrating clean up dust automatically. Dust removes effect of good, reduce the cost of abrasive and improve efficiency, and there is no environmental pollution.
3.Suction sand blasting cabinet are suitable for surface treatment of all products of metal, plastic and glass ect. Remove oxide skin. 
About Mayflay Company:
Introduction:
Mayflay Machinery (Huizhou) Co.,Ltd is a research and development ,design
Fiber laser cutting machine can be used for both plane cutting and bevel cutting, and the edges are neat and smooth. axis laser. Compared with ordinary carbon dioxide laser cutting machines, it saves space and gas consumption, and has high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product and one of the world's leading technology products.
Main features:
(1) The fiber laser has high electro-optical conversion efficiency, and the conversion efficiency is over 30%. The low-power fiber laser does not need to be equipped with a chiller. The use of air cooling can greatly save power consumption during work, save operating costs, and achieve the highest production. efficiency;
(2) The laser only needs electric energy during operation, no additional gas to generate the laser is required, and the operation and maintenance costs are the lowest;
(3) The fiber laser adopts semiconductor modularization and redundant design, there is no optical lens in the resonant cavity, and no startup time is required. It has the advantages of adjustment-free, maintenance-free, and high stability, which reduces the cost of accessories and maintenance time. Unmatched by traditional lasers;
(4) The output wavelength of the fiber laser is 1.064 microns, which is 1/10 of the wavelength of CO2. The output beam has good quality and high power density, which is very conducive to the absorption of metal materials, and has excellent cutting and welding capabilities. lowest cost;
(5) The optical route of the whole machine is transmitted by optical fiber, no complicated light guide system such as mirror is needed, the optical path is simple, the structure is stable, and the external optical path is maintenance-free;
(6) The cutting head contains protective lenses, so that the consumption of valuable consumables such as focusing lenses is extremely small;
(7) The light is exported through the optical fiber, which makes the design of the mechanical system very simple, and it is very easy to integrate with the robot or the multi-dimensional workbench;
(8) After adding the optical gate, the laser can be multi-machine, divided into multiple channels and multiple machines to work at the same time through optical fiber splitting, which is easy to expand the function, and the upgrade is convenient and simple;
(9) The fiber laser is small in size, light in weight, movable in working position, and small in footprint;
Fiber laser cutting machine, laser cutting machine, cnc laser cutting machine, cnc fiber laser cutting machine
Wuxi Zhouxiang Complete Set of Welding Equipment Co., Ltd. , https://www.beamweldingmachine.com