How to choose a cheap and affordable PU line

How to choose cheap and affordable PU lines in the decoration, especially in partial European style decoration, PU lines are light, water-resistant, moisture-proof, non-cracking, odorless, environmental protection, various colors, complete accessories and other advantages , to win the majority of people's love, everyone has turned from the plaster line PU line. With the continuous increase of PU manufacturers, the production levels and positioning of various manufacturers are too different. Here I introduce how to purchase the price of the United States and the United States cheap PU lines, spend less money, spend the money on the blade! Please agree to raise your hand! ! !
A sense of appearance:
The most direct and emotional thing is to see the feeling of lines. The appearance requires fullness and naturalness, with sharp edges and corners; the surface is free of impurities, dirt, discoloration, or paint piles. Such a line belongs to a good seedling and can be cultivated in the later period.
The surface of the general bad line is relatively rough, and the corner is originally a rounded corner, which is caused by the incomplete production cost for the manufacturer. The appearance of this kind of appearance is the knockoff cargo.
Reference:
Now many new manufacturers, in order to speed up the mold production speed, reduce costs, directly take the lines of other manufacturers to directly turn the mold, this is fast, but the disadvantage is very obvious, that is, lines are not enough delicate, inaccurate dimensions.
Second, enjoy color
The advantages of PU lines are mainly reflected in the color, especially the custom colors, champagne gold, champagne silver, rose gold, gold, and silver. Based on this, we need to carefully observe whether the bottom of the line is smooth and flat. , touch coating yellow green primer, generally the primer is matte white, with a degree of refraction; overall looks very delicate, comfortable, uniform color. If the direct result of this layer surface treatment is not done, the surface of the line is likely to be yellow, and the color of each line is not uniform, causing fatal reasons such as unacceptable acceptance.
If you do these PU lines, the surface is rough, the lines are not clear, the edges and corners are not clear, and if you do not touch the environment-friendly yellow primer, the PU lines will lose their fine detail and exquisiteness. Get out of the competition with other material lines!
Reference:
Some factories use low quality primers to save costs, and individual shops simply do not do the above work due to limited venues or cost savings, resulting in unqualified lines flowing into the market and damaging word of mouth.
Third, look at the density Secondly see the density, saw a section of the line, if the quality of the line is better, the structure of the cut surface is even and tight, two lines are seamless when splicing, and the relative thick line is the top grade.
General line section roughness, cutting blade is not adjusted more vertical, the product is relatively light, the Department of the use of a low density of raw materials, resulting in product foaming, product weight, large shrinkage after installation, late maintenance trouble.
Reference:
In order to reduce costs, individual manufacturers have done a lot of articles on the ratio of materials, the cost is down, the density is relatively low, and the direct consequence of low density is weak.

Fourth, than the weight:
Relatively speaking, the lines with high product density are relatively heavier in terms of products of the same type, and they have better toughness and can be easily processed and formed.
The product with low product density is relatively light, the product has many pores, and the edges and corners are unclear, and it is fragile. Subsequent processing is somewhat difficult.
The reference basis is to save costs, and directly related to the density of raw materials and the weight of the product, so generally low-priced products, usually can only use low-density raw materials, production of less feed, so as to meet the general low-cost requirements, However, such situations directly affect the appearance and use of the product.
To sum up, if you do not understand the line is good or bad, you can simply compare the above four aspects, you can contact the buckle: Lu Lu Lu Lu, you know the quality of your product How is it? Of course, this is only one of the steps. If you want PU lines to be able to fully display their effects, installation is also a top priority. For details, please listen to the next tutorial!



Beiben Truck Parts

We can provide you the realiable quality and best price truck parts to maintance your after market service suitable for the BEIBEN truck. Our main product:


- cabin assy and cabin accessory; Headlamp, taillamp, bumper, front cover, door and glass;

- chassis parts; sun gear, brake pad, clutch plate, Bearing, differential, PTO, and axle;

- transmission parts; transmission shaft, universal joint, steering pump, clutch booster and brake pedal;

- Engine Parts; cylinder liner, piston, piston ring, oil seal, connection rod bearing, starter, injection pump, oil pump, water pump, air filter, oil filter and fuel filter;

- other spare parts. Curtain, roof, water tank, radiator, inter cooler and ect.


GENLYON


CAMC


Beiben Truck Parts,Truck Body Parts,Beiben Truck Spare Parts,Beiben Truck Engine Parts

Jinan JF Co., Ltd , https://www.jfsinotruk.com